Metrologic, Focus, User's Manual. Metrologic, Fusion, Product Manual. Metrologic, Fusion, OPOS Driver. Metrologic, Horizon, Manual. Metrologic, MS6720, Manual. Download Flatout 2 Tpb. Metrologic, Orbit, Manual. Metrologic, QuantumT, manual. Metrologic, ScanPal 2 Portable Data Collector, Manual. Metrologic, Voyager, Programming Manual. To transmit the data from the ScanPal 2 unit to your PC perform the following steps: 1. Place the ScanPal Unit in the cradle. Both the green and red lights should light up. The green light may blink. Turn power on [orange button] on ScanPal unit. Press ESC on ScanPal unit. Press 2 [Upload data] on. Jun 21, 2012. Most USB-HID (set preamble of control B) (medium). Most scanners with OPOS driver support. ☻Tested Product: Barcode Scanner w/ USB Kit. MFG: Metrologic. Model: ScanPal®2. Ease of Configuration: medium 3).

The software suit for this device can be downloaded from This device uses the data_read.exe program to download the data from the data collector. To set this up create a directory such as c: metro Copy the data_read.exe program from the metrologic install directory into this directory. Use the data_read.exe program to test your communication with the data collector, when you have the setting correct, make note of them. In System Five, setupwizard, Point of Sale Devices, data collector/file import settings, Set the Data Collector File Format to Item,quan Set Data Collector Program Interface to Use Command line parameters Command Line c: metro data_read.exe Parameters data.txt,,,1,1,1,1,1,0,0,2 *Replace with parameters from the list below.

The following steps are used to configure the MK5502 Data Collector: 1. Install the OptimusS Software that came with the Data Collector. The Path is Start >Programs >Optimus Software >Optimizer. The Data Collector requires you to download a program, which allows it to recognize serial numbers.

First we will setup the hardware aspect of the Data Collector. Plug one end of the USB Serial Cable to the host computer, and the other end to the RS 232 port on the back of the Cradle. As well, plug in the power cord to the right of the RS 232 port, and the other end to an available outlet. Now you can place the Data Collector into the Cradle and it should be able to charge. Hold down the power button on the bottom right corner of the device, and the device should power on. At this point, if you try scanning an item, you will get a “Wrong data type” Error. This is due because there is NO program downloaded to the scanner that makes it recognize serialized items.

So the next step will see you downloading a program to the Data Collector. To download the default Optimus program, navigate to the Optimus Program which is located at (Start >Programs >Optimus Software.) 5.