Alright, about a month ago, my Blu-Ray drive in my laptop would not show up in My Computer and had the! Symbol in device manager. I followed the steps outlined in: and was able to resolve that issue. Now a new issue has shown up where DVD writing software, specifically Roxio Easy Media Creator 10 LJ, gives the message: 'All your drives are set to disabled. On this operating system, in order to start Easy Media Creator 10 LJ you must either physically remove your drive(s) or enable at least one drive.' Here are the steps I have followed so far to help those helping me not to have to repeat steps already tried: 1. I have tried uninstalling the Intel(R) ICH9M-E/M SATA AHCI Controller (from IDE ATA/ATAPI controllers) as that is what connects my device.

I even deleted the driver software for the device before restarting the computer and then did a clean install of the newest version. Body Vision 620 Weight Bench Manual Transfer. I have tried disabling then enabling the Blu-Ray drive device in Device Manager. I tried uninstalling the Blu-Ray drive device in Device Manager, restarting the computer, and letting Windows re-install. I have downloaded and installed the latest PXEngine from with no results. I tried running again, but the issue persists. Edit: I should mention that I cannot repair the Roxio program as it came with my laptop, so the only way to fix it would be to recover my computer to factory settings and lose all my programs setup. I have backup images, but I believe the oldest image I have started with the drive not recognized in Windows problem from a month ago (I didn't realize I was having that issue until after I made the backup).

Keyboard E-Z Eyes, bright yellow keys with large characters Mouse steelseries SENSEI Laser Pro Gaming PSU Corsair HX650W Case Inwin Dragon Rider Cooling Hyper 212 EVO w/two Noctua fans, push-pull, @1300 RPM Hard Drives Samsung 840 Pro 256GB SSD for OS, 500GB Seagate Constellation (Enterprise drive) for Data Internet Speed 48-51Mbs Mbs down, 11 Mbs up Xfinity Cable Antivirus Norton Internet Security 2013 Browser IE 10, Opera, Pale Moon if needed Other Info 4 case fans, LG BluRay-RE, ASUS DVD-RW, Mr. Fusion power supply, 1.21 gigawatts. This may seem simplisitc, but do you have the BD selected for recording in its properties? There may be a firmware update for the drive too. If you can, power off, take out the drive, boot up, power back off and put the drive back in and boot up. Sometimes this will force a component to be recognized properly. I had a HP once that had a recovery partition that could repair individual programs.The firmware is up to date and the BD is selected for recording.

My recovery partition is hidden; would you recommend unhiding it in Disk Management? I will look into how to remove my drive, as well. Alright, I turned off the computer, removed all power sources, physically removed the drive, replaced power sources, and started Windows. Then shut down the computer, removed all power sources, physically replaced the drive, replaced power sources, and started Windows. Still Roxio insists my devices are disabled. I also reset the CMOS, cleared temporary memory, and reset BIOS software connections with the Hardware. Roxio continues to have issues.